Set up a collator

Node Infrastructure Requirements

On our path to decentralization and trustlessness, collators are a very important piece of the puzzle. We must maintain a high level of performance (as close to a 12 second block production time as possible), and a high degree of availability. As such, the Foundation must prescribe certain technical specifications when onboarding node operators.

Network: 1Gbit/s
CPU: 4.2GHz
- We use Intel Xeon E-2388G processors
RAM: 16GB
Storage: 1TB NVMe

We recommend using a dedicated server instead of a virtual machine from a cloud provider to ensure maximum single-thread performance.

Be sure to monitor your collator with tooling like Prometheus and Grafana.

Please sync a few days before your intended collation / block production candidacy to sync the nodes. Once your node is synced, you will find that the block numbers are up to date with both the relay chain and the parachain. Check out the Turing Network Telemetry site for more information.

Ports

Please ensure the following configuration for your node.

P2P port must be open to incoming traffic:
- Source: Any
- Destination: 30333, 30334 TCP

Performance Incentives

We will need to ensure that collators are economically incentivized to have the most optimal node infrastructure in place to secure and do what’s best for the network at large. While initially we are not implementing slashing, it would be to the benefit of the collator to have the requirements above to ensure that they can receive their rewards and get chosen from the collator pool.

For now, the incentives are purely rewards based since we’ve vetted a closed set of community collators with a solid reputation in the DotSama ecosystem.

Turing Network - Kusama Parachain

The Turing Network is live on Kusama. If you’re interested in collating, please reach out via Ava Protocol Discord, or email collators@avaprotocol.org. You will need to meet the minimum bond found in the collator on-boarding page.

Set up a collator

Step 1 - Create a wallet for your collator

In this step, we’ll generate a node key for your collator. The simplest method to accomplish this is by using Substrate’s Subkey command-line tool. After you’ve installed the tool, execute the command subkey generate-node-key. This command will yield two lines of output. The first line represents a new Substrate wallet address, and the second line is its corresponding private key.

Step 2 - Start up the collator program

Option 1: Download a release binary(Recommended)

If you’re running Ubuntu (20.04+ LTS x64), you can utilize the binary compiled by Ava Protocol, available on our Latest Release page. This binary will enable you to operate your collator on your node. To download it via command line, follow the commands detailed below.

latest_url=$(curl -Lsf -w %{url_effective} https://github.com/AvaProtocol/OAK-blockchain/releases/latest/download/)
version=${latest_url##*/}
echo $version

The echo command will print out the version of the collator to be installed. Then, run the below command to download a .deb file, unpackage it and install the binary.

# Download the latest .deb file
curl -L https://github.com/AvaProtocol/OAK-blockchain/releases/download/$version/oak-collator.deb -o oak-collator-$version.deb

# Unpackage and install the .deb file
sudo dpkg -i oak-collator-$version.deb

After the binary is setup, you can check it via the below command.

whereis oak-collator  # print out the installed location
oak-collator --help

Now you can simply run the following to start a collator for Turing Network. Optionally, you could add the --pruning=archive parameter to prune the state of early blocks in order to save disk space.

oak-collator \
  --name=<collator_name> \
  --base-path=<path_to_blockchain_data> \
  --chain=turing \
  --node-key=<node_key_created_in_step_1> \
  --collator \
  --force-authoring \
  --execution=wasm \
  -- \
  --execution=wasm \
  --no-telemetry

To ensure maximum uptime, we advise you to consult our guide for automatically restoring the collator program upon server startup or in case of failure. For more detailed instructions, please refer to our Manage collator with systemd page next.

Option 2: Compile from source code

If you machine runs a different architecture, or you are struggling with binaries from the above, you may need to compile the binary within your node. If you’re running a different OS, please compile the binary first and follow the instructions in the OAK-blockchain README. For example, for the v1.9.0 binary, you can run the following command on your node.

git clone git@github.com:OAK-Foundation/OAK-blockchain.git
git fetch --all --tags
git checkout tags/v1.9.0 -b branch-1.9.0

Switched to a new branch 'branch-1.9.0'

Then build your executable with cargo build.

cargo build --release --features turing-node

Afterwards, run the following to start a collator for Turing Network. Optionally, you could add the --pruning=archive parameter to prune the state of early blocks in order to save disk space.

oak-collator \
  --name=<collator_name> \
  --base-path=<path_to_blockchain_data> \
  --chain=turing \
  --node-key=<node_key_created_in_step_1> \
  --collator \
  --force-authoring \
  --execution=wasm \
  -- \
  --execution=wasm \
  --no-telemetry

Option 3: Pull Docker image

Note regarding Docker: while we do support Docker images, we generally do not recommend this option unless you’re testing. Docker builds are less performant when running nodes than using the binary paths above.

If you opt to run the collator using Docker, you’ll find the Docker builds on Ava Protocol’s DockerHub. Begin by pulling the latest image and creating a volume for your data. You can confirm the volume’s creation by conducting an inspection. The following commands will guide you through these steps.

docker pull oaknetwork/turing:latest
docker volume create turing-data
docker volume inspect turing-data

Then, configure and docker run to start the program.

docker run -d -p 30333:30333 -p 9944:9944 -p 9933:9933  -v turing-data:/data oaknetwork/turing:latest \
  --name=<collator_name> \
  --base-path=/data \
  --chain=turing \
  --node-key=<node_key_created_in_step_1> \
  --collator \
  --force-authoring \
  --execution=wasm \
  -- \
  --execution=wasm \
  --no-telemetry

Step 3: Check that your node is in the Telemetry list and is connected to the network

If you’re successful in connecting to the network and sending your Telemetry data, you can see your node’s name (<collator_name>) on Turing Network Telemetry

Step 4: Sync your node

Please ensure that both the relay chain block number and parachain block number are up to the latest block number. The logs will indicate whether or not the nodes are fully synced. While you’re blocks are syncing, monitor the initialization, especially for the first few lines to ensure that you are pointing to the correct network. If you run into any issues, head over to the Ava Protocol Discord for help.

Step 5: Onboard your collator

Once you’re fully synced, you’re ready to on-board as a collator. Proceed to this page to move forward and to start producing blocks. How to register as a collator

Setup a RPC node

Ava Protocol provide an RPC which everyone can use at rpc.turing.oak.tech. It handle both of JSON RPC and websocket request.

If you plan to run a node to serve RPC yourself, or have been running a RPC you can use these below parameter:

oak-collator --rpc-max-connections=1000 --rpc-cors=all

If you want to lock down to a specific hostname you can use:

oak-collator --rpc-max-connections=1000 --rpc-cors=wss://host-name,https://host-name

2.1.0 upgrade

If you have been upgrade from pre 2.1.0 you need to adjust your RPC param as below

we no longer need to specify ws-port for parachain. all the ws-* param is removed.
you would need to move those into rpc such as --rpc-max-connections=5000 --rpc-cors=all

Common issues

Memory consumption is high and not going down

If you are running into a memory issue where oak-collator memory consumption won’t go down, you can try to work-around this by disabling relay chain block pruning using the below parameter

oak-collator parachain-param ... \
 -- \
 --normal-relaychain-param-here \
 --blocks-pruning=archive --state-pruning=archive

You can monitor the memory with command such as

free -h

# Example output
              total        used        free      shared  buff/cache   available
Mem:          7.6Gi       3.6Gi       1.4Gi        78Mi       2.6Gi       3.6Gi
Swap:            0B          0B          0B

Or using tool such as htop(available on apt with apt-get install htop) and observe that the memory only grow up rapidly and eventually lead to an OOM and being kill by the kernel.

OOM log can also see with dmesg and search for Out of memory, Kill process

Overview

Run a Collator

Set up a collator

Node Infrastructure Requirements

Ports

Performance Incentives

Turing Network - Kusama Parachain

Set up a collator

Step 1 - Create a wallet for your collator

Step 2 - Start up the collator program

Option 1: Download a release binary(Recommended)

Option 2: Compile from source code

Option 3: Pull Docker image

Step 3: Check that your node is in the Telemetry list and is connected to the network

Step 4: Sync your node

Step 5: Onboard your collator

Setup a RPC node

2.1.0 upgrade

Common issues

Memory consumption is high and not going down

Collator Overview

Manage collator with systemd

Related Docs

Overview

Run a Collator

User Guide

Governance

Staking

Get Started

Develop

Cross-chain Automation

Staking

Governance